top of page
EDELWASSER Technical Data
Screenshot 2023-03-20 at 4.30.12 PM.png

Item Code:  PWC-670-BLACK/GOLD

Product Name: EdelWasser, (Black) (Gold)

Application: The device is designed primarily for municipal water tap filtration. For home use

Gross weight [kg]: 4.5

Net weight [kg]: 6

Color: Black/Gold

Producer: HOME ART. & SALES SERVICES AG , Sihleggstrasse 23 , 8832 Wollerau-Switzerland

Functions: Water filtration

Purifying method: Reverse osmosis

Voltage: NOT APPLICABLE

Type applied filters: RO membrane filter 20 GPD (main), carbon filter, mechanical filter, antibacterial filter

Working temperature: From 5ºC to + 35ºC

Dimensions: 200 mm (width) x 390 mm (depth) x 370 mm (height)

Maximum Daily Water Production Volume:

76,8 l/d - 112 l/d (for conditions: water temperature 25 degC, 138 kPa / 1,34 bar/20 psi / 344,74 kPa / 3,45 bar / 50 psi)

Protection: Float valve (cutting off water filtration)

Filter replacement frequency: 

Recommended term of replacement, counted from the date of installation:PWC-670-01 NEO SENSE - mechanical filter - every 6 months

 

PWC-670-02 INNO SENSE – mechanical-carbon filter - every 18 months

PWC-670-03 RO membrane filter 20 GPD - every 20-24 months

PWC-670-09 Hygienic filter – every 20-12 months

The table shows only approximate, estimated series of exchanges not their warranty period. To ensure the most optimal filtration you may need to replace filters with greater frequency. Speed and quality of the filtration (the yield of water) is mainly dependent on water pressure, temperature and quality of the filtered water. Thus, reverse osmosis system always generate a recoil water. For EDELWASSER the ratio is provided 4:1 and in case of low pressure on the network even 6:1.

Composition: 

Service and installation manualThe device (with filters Neo-sense, reverse osmosis and Inno-sense)

 

Elbow (1/4 inch white) - 4 pieces

Clamp into the drain - 1 piece

Water hoses (double enclosure, ¼ inch) - 5m

Adapter ½ (valve1/4) - 1 piece

Hygienic filter – 1 piece

Band clips x 2

Made in: Korea

Warranty: 2 years

Montage: 

Installation and service of purchased product should be carried out by the Customer on their own or with local plumber or hire local company which provides such services – on Customer cost. These activities should be carried out according to the manual delivered with product. The manual is also available in section 'Presentation'.

 

EDELWASSER, the device for purifying water, is designed to be mounted on the worktop. Installation, operation, maintenance and repair should be performed only by manual instruction. We recommend preparing the installation site: • The distance between the place of connection and the place of installation of the device should not exceed 1.5 m • The distance from the source of water should not exceed 3 m. • The distance from the outflow of consumed water should not exceed 3 m • The dimensions of the installation site should be consistent with the dimensions of the EDELWASSER. It is recommended to install the device near the sink to make the inlet and outlet water hoses easily accessible. Note: Depending on the installation place and technical possibilities of connecting it to the drainage system, it may be necessary to drill a hole, e,g. in the kitchen worktop. Therefore, any additional work to prepare the site and infrastructure for installation /connection of the filter (e.g. specialized drilling of holes in stone, marble or other tops, adaptation of the drainage system, installation of independent water supplies, securing additional connections and valves) must be predicted by the customer.

​

Certifications/Declaration

Declaration of Conformity concerning the Regulation (EC) Nº1935/2004 on materials and articles intended to come into contact with food.

bottom of page